AAC Cutter is the main equipment of prodrcins aeroconcrete, crete nildbe needed over 50000m3 is anecessary equipment to improve yield and quality ,our HJQ-A cutting with advanced teehnology ,can make the failed with only one step ,turning cut the sir sides . so our products are welcomed all over our country ,and gained honor from our users .after yesrs technology innovation ,nawaday,we are able to produce many models of concretecutlins machines.

Working Principle

1. Aerial turnover crane brings the green cake in to sky, turnover 90 degrees, puts it onto the cutting car, cuts the base body with side panel which is powered by electric and walk to stay, finish cuts vertically.

2. Cutting car continues moving after the central position of the crosscut device stops, the crosscut device is started, crosscut shelf cuts the block from top to bottom in vertical cutting.

3. Cutting car walks to organize into groups. The hanger hangs the green cake, and raise up out of curing car, cutting car returns to primitive position to carry on the next cutting circulation.

Advantages of AAC Cutter:

1. The machine structure is simple and practical, the maintenance is easy;

2. The green cake is sideward, so the width of the whole green cake is 600mm, and the height is 1200mm. Steel wires for cutting is short, which is also difficult to rupture and float. It is high in cutting precision;

3. The vertical cutting device is fixed. Crosscut device cuts the green cake vertically by steel wires. It shortens the cutting steel wires length, guarantee precision of cutting;

4. This machine cuts the green cake in Hexahedron-type, so the products quality wont be influenced by the distortion of the mould;

5. Cylinder Tension, which supply gas to each wire respectively;

6. Avoiding the wires being stretched off by using a special device;

7. Life of the wire can extend (Usually 10 days, Now 20 days);

8. Operating it in use of the computer touch panel, realize separation of Man-Machine.

Technical Parameter

AAC Cutting Machine, Step Fixed Cutting Machine

Main Features of the Machine:

1. Simple and practical structure, easy installation and maintenance;

2. After tilting the blank stands vertically with the width of 600mm and the height of 1200mm, thus the cutting wire can be shorter and cutting precision can be more exactly due to that it is not easy to be broken and drifted;

3. As the blank stands vertically, the grooves on both sides of the blank (within width of 600mm) can be milled at the time when the blank is cut vertically, no groove processing device is needed;

4. The machine can process both building blocks and slabs, and the blank can be cut in 6 sides therefore the quality of product is free from affection of mould oil and the deformation of the mould;

5. The machine has simple operation and cutting processes (titling, vertical cutting and cross cutting) can be finished in different positions plus that cutting and running are controlled in the same device, therefore, operating is simplified and maintenance is convenient.