Air Swept Coal Mill Design Feature:
Air swept coal mill from the Department of feeding and exit material, Rotary Department, Transmission Division (reducer, small driving gear, electrical, electronic control), and other key parts. The use of cast steel hollow shaft, lining can be replaced, slewing gear hobbing using casting processing, the body set with cylinder liner wear-resistant, has good wear resistance. Operation of the machine stable, reliable work. Rotary kiln using coal as fuel, the air swept grinding mill is not only the best equipment while drying.
Air Swept Coal Mill Main Technical Parameters:
Specification (mm) |
Grinding Machine Capacity (t) |
Canister Rev (r/min) |
Capacity (t/h) |
Electromotor |
Size (mm) |
||
Model |
Power (kw) |
Voltage (v) |
|||||
1200x2400 |
4.8 |
32 |
1.4-2 |
Y280M-8 |
45 |
380 |
6520x2850x2540 |
1500x3000 |
8 |
28.8 |
2-3 |
JR125-8 |
95 |
380 |
7604x2630x2698 |
1700x2500 |
7.5 |
24.5 |
3~5 |
JR116-6 |
95 |
380 |
6998x3700x2628 |
2200x3000 |
13 |
22 |
5~6 |
JR136-8 |
180 |
380 |
7680x4389x3950 |
2200x4400 |
21 |
8-9 |
YRKK4501-6 |
250 |
380 |
7880x4420x3950 |
|
2200x5800 |
21 |
5.5-7 |
Y4005-8 |
280 |
380 |
9060x4480x3950 |
|
2400x4750 |
22 |
20 |
10~12 |
YR400-8 |
280 |
6000 |
7770x5266x4024 |
2400x4000+2000 |
10-11 |
YRKK450-8 |
250 |
6000 |
10600x5500x4024 |
||
2400x4500+2000 |
10-12 |
YRKK500-8 |
280 |
6000 |
11200x5500x4024 |
||
2500x3900 |
14 |
JR138-8 |
280 |
6000 |
8770x6266x4870 |
||
2600x(5250+2250) |
9-10 |
YRKK500-8 |
400 |
6000 |
|||
2800x(5000+3000) |
13-13.5 |
Y5001-8 |
500 |
6000 |
|||
2900x4700 |
35 |
18.6 |
16 |
JSQ1512-6 |
570 |
6000 |
8930x6179x4440 |
