Description of Flotation Machine:
Our Flotation Machine is the latest design to use the circular tank concept and combines the benefits of circular cells with the unique features of the Minerals mechanism to create the ideal conditions to maximize floatation performance for all roughing, cleaning and scavenging duties, which can be used to separate nonferrous metal, ferrous metal, noble metal, nonmetallic mine, chemical material and recycle mine. It features: high inhalation, low power. Each chute can inhale gas, sink magma, separate. There is no need of accessory equipments horizontal equipment. It is easy to change the flow chart. The cycling way of magma is very reasonable. It can reduce the impurities to a great extent. There is automatic equipment on the magma surface. It is easy to adjust. The upward one makes the magma cycle toward upward, which the downward one makes the magma cycle downward.
The working principle of flotation machine
When flotation machine works, slurry is inhaled from the bottom of the trough to the space between impellers. Meanwhile, the low-pressure air send by fan is sent to this area through the air distributor in the hollow shaft. After sufficient mixing, the slurry is pushed out by the impeller, and then goes to the whole trough. When the froth rises to the stable level, after the enrichment processing, froth overflows to the froth trough from the overflow weir. Another part of ore slurry flows to lower part of impeller for the re_mis with air. The remained slurry flows to the next trough until becomes residue.
Specifications of SJK Flotation Machine:
Type |
Cubage (m3) |
Diameter of impellor (mm) |
Capacity (m3/min) |
Speed of impellor (r/min) |
Scraper speed (r/min) |
Motor type |
Power (kw) |
Overall dimensions (mm) (four slot in one body) |
Weight (t/single trough) |
XJK-0.13 |
0.13 |
200 |
0.05-0.16 |
600 |
17.5 |
Y90L-4 |
1.5 |
2100x865x900 |
0.35 |
XJK-0.23 |
0.23 |
250 |
0.12-0.28 |
500 |
17.5 |
Y90L-4 |
1.5 |
2625x1130x1290 |
0.41 |
XJK-0.35 |
0.35 |
300 |
0.18-0.4 |
470 |
17.5 |
Y100L1-4 |
2.2 |
3012x1350x1320 |
0.45 |
XJK-0.62 |
0.62 |
350 |
0.3-0.9 |
400 |
16 |
Y100L2-4 |
3 |
3800x1500x1550 |
0.85 |
XJK-1.1 |
1.1 |
500 |
0.6-1.6 |
330 |
26 |
Y132M-6 |
5.5 |
4680x1820x1950 |
1.4 |
XJK-2.8 |
2.8 |
600 |
1.5-3.5 |
280 |
26 |
Y160L-6 |
11 |
7750x2600x2700 |
2.43 |
SF Flotation Machine
Product description:SF-suction From The Flotation Machine
SF-flotation machine applied to the separation of non-ferrous metals, ferrous metals, precious metals, non-metallic mineral and chemical raw materials, recovery of useful minerals. The device has the following characteristics: inhale large, low power consumption.
Flotation Machine Each slot both inspiration, and Flotation plasma absorption triple function, since the flotation into a loop, without any auxiliary equipment, standard configuration for the process of change.
Pulp cycle is reasonable, to minimize the coarse sand sediment. With pulp side of the control device, easy adjustment. After the impeller with a dump-down of the leaves. Leaves on the circle generate pulp, under the leaves produce the next cycle of pulp.
Specifications of Flotation Machine:
Type |
Tank volume ( m3 ) |
Inspiratory capacity ( m3/ m2 /min) |
Electric motor power ( kw) |
Production capacity ( m3/ min ) |
Single weight ( kg ) |
SF-0.15 |
0.15 |
0.9-1.0 |
2.2 |
0.06-0.18 |
270 |
SF-0.25 |
0.25 |
0.9-1.0 |
1.5 |
0.12-0.28 |
370 |
SF-0.37 |
0.37 |
0.9-1.0 |
1.5 |
0.2-0.4 |
470 |
SF-0.65 |
0.65 |
0.9-1.0 |
3.0 |
0.3-0.7 |
932 |
SF-1.2 |
1.2 |
0.9-1.0 |
5.5 |
0.6-1.2 |
1370 |
SF-2.0 |
2.0 |
0.9-1.0 |
7.5 |
1.0-2.0 |
1750 |
SF-2.8 |
2.8 |
0.9-1.0 |
11 |
1.5-3.5 |
2130 |
SF-4.0 |
4.0 |
0.9-1.0 |
15 |
2-4 |
2585 |
SF-6.0 |
6.0 |
0.9-1.0 |
18.5 |
3-6 |
3300 |
SF-8.0 |
8.0 |
0.9-1.0 |
30 |
4-8 |
4130 |
SF-10 |
10 |
0.9-1.0 |
30 |
5-10 |
4500 |
SF-16 |
16 |
0.9-1.0 |
45 |
8-16 |
8320 |
SF-20 |
20 |
0.9-1.0 |
45 |
10-20 |
8670 |
